6>[    0.172416] bus: 00 index 0 io port: [0x00-0xffff]
[    0.177210] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.183129] bus: 01 index 0 mmio: [0x0-0x0]
[    0.187313] bus: 01 index 1 mmio: [0xc0000000-0xdfffffff]
[    0.192712] bus: 01 index 2 mmio: [0x0-0x0]
[    0.196894] bus: 01 index 3 mmio: [0x0-0x0]
[    0.201098] NET: Registered protocol family 2
[    0.205592] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.212939] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.221679] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.228677] TCP: Hash tables configured (established 131072 bind 65536)
[    0.235306] TCP reno registered
[    0.238630] NET: Registered protocol family 1
[    0.243284] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
[    0.413204] Freeing initrd memory: 2048k freed
[    0.418184] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.426652] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.441447] squashfs: version 3.4 (2008/08/26) Phillip Lougher
[    0.448352] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.454914] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.461680] fuse init (API version 7.10)
[    0.466078] msgmni has been set to 1256
[    0.471481] alg: No test for stdrng (krng)
[    0.475624] io scheduler noop registered
[    0.479571] io scheduler anticipatory registered
[    0.484187] io scheduler deadline registered
[    0.488545] io scheduler cfq registered (default)
[    0.503138] Real Time Clock Driver v1.12ac
[    0.507278] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    0.513498] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a GEN3_serial
[    0.520067] serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a GEN3_serial
[    0.529770] brd: module loaded
[    0.534114] loop: module loaded
[    0.537264] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[    0.543729] Copyright (c) 1999-2006 Intel Corporation.
[    0.548953] e1000 0000:01:0c.0: setting latency timer to 64
[    0.575641] e1000: 0000:01:0c.0: e1000_probe: (PCI:33MHz:32-bit) 1c:7e:e5:0e:6b:4e
[    0.609878] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    0.616859] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[    0.622961] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    0.628898] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    0.635520] Copyright (c) 1999-2008 Intel Corporation.
[    0.640758] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[    0.646856] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.653578] usbcore: registered new interface driver cdc_ether
[    0.659491] usbcore: registered new interface driver rndis_host
[    0.665505] Driver 'sd' needs updating - please use bus_type methods
[    0.671975] Driver 'sr' needs updating - please use bus_type methods
[    0.678479] SCSI Media Changer driver v0.25 
[    0.682815] Driver 'ch' needs updating - please use bus_type methods
[    0.689529] physmap platform flash device: 02000000 at c0000000
[    0.698056] physmap-flash physmap-flash.0: map_probe failed
[    0.703752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.710363] ehci_hcd 0000:01:0d.0: setting latency timer to 64
[    0.710372] ehci_hcd 0000:01:0d.0: EHCI Host Controller
[    0.715751] ehci_hcd 0000:01:0d.0: new USB bus registered, assigned bus number 1
[    0.744057] ehci_hcd 0000:01:0d.0: cache line size of 32 is not supported
[    0.744076] ehci_hcd 0000:01:0d.0: irq 4, io mem 0xdf810100
[    0.760091] ehci_hcd 0000:01:0d.0: USB 0.0 started, EHCI 1.00
[    0.766054] usb usb1: configuration #1 chosen from 1 choice
[    0.771737] hub 1-0:1.0: USB hub found
[    0.775503] hub 1-0:1.0: 1 port detected
[    0.779862] ehci_hcd 0000:01:0d.1: setting latency timer to 64
[    0.779870] ehci_hcd 0000:01:0d.1: EHCI Host Controller
[    0.785189] ehci_hcd 0000:01:0d.1: new USB bus registered, assigned bus number 2
[    0.816238] ehci_hcd 0000:01:0d.1: cache line size of 32 is not supported
[    0.816252] ehci_hcd 0000:01:0d.1: irq 4, io mem 0xdf820100
[    0.832273] ehci_hcd 0000:01:0d.1: USB 0.0 started, EHCI 1.00
[    0.838206] usb usb2: configuration #1 chosen from 1 choice
[    0.843893] hub 2-0:1.0: USB hub found
[    0.847661] hub 2-0:1.0: 1 port detected
[    0.851974] Initializing USB Mass Storage driver...
[    0.856959] usbcore: registered new interface driver usb-storage
[    0.862976] USB Mass Storage support registered.
[    0.867756] usbcore: registered new interface driver usbserial
[    0.873660] USB Serial support registered for generic
[    0.878801] usbcore: registered new interface driver usbserial_generic
[    0.885330] usbserial: USB Serial Driver core
[    0.889758] USB Serial support registered for FTDI USB Serial Device
[    0.896226] usbcore: registered new interface driver ftdi_sio
[    0.901987] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[    0.908705] i8042.c: No controller found.
[    0.945245] mice: PS/2 mouse device common for all mice
[    0.952187] usbcore: registered new interface driver hiddev
[    0.957872] usbcore: registered new interface driver usbhid
[    0.963456] usbhid: v2.6:USB HID core driver
[    0.967802] oprofile: using timer interrupt.
[    0.972334] TCP cubic registered
[    0.975623] Initializing XFRM netlink socket
[    0.980175] NET: Registered protocol family 10
[    0.984936] lo: Disabled Privacy Extensions
[    0.989342] Mobile IPv6
[    0.991780] IPv6 over IPv4 tunneling driver
[    0.996246] sit0: Disabled Privacy Extensions
[    1.000862] ip6tnl0: Disabled Privacy Extensions
[    1.005517] NET: Registered protocol family 17
[    1.009975] NET: Registered protocol family 15
[    1.014709] RPC: Registered udp transport module.
[    1.019417] RPC: Registered tcp transport module.
[    1.024156] Using IPI Shortcut mode
[    1.028484] RAMDISK: Compressed image found at block 0
[    1.208576] EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.
[    1.219508] 
[    1.221129] EXT4-fs: Update your userspace programs to mount using ext4
[    1.227749] EXT4-fs: ext4dev backwards compatibility will go away by 2.6.31
[    1.234730] EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.
[    1.245617] 
[    1.247291] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[    1.254802] VFS: Mounted root (ext2 filesystem).
[    1.259736] Freeing unused kernel memory: 256k freed
[    1.276649] flashreg is e8862000
[    1.279927] flashmem is e8866000
[    1.283238] Global Memory is 1900122
[    1.317529] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.469909] usb 1-1: configuration #1 chosen from 1 choice
[    1.481926] hub 1-1:1.0: USB hub found
[    1.485734] hub 1-1:1.0: 4 ports detected
[    1.530786]  Glob_Spectraa: Glob_Spectraa1 Glob_Spectraa2 Glob_Spectraa3 Glob_Spectraa4
[    1.557778] Spectra: Spectra module loaded with major number 254
[    1.563825] NAND flush thread is pid 522
[    1.630310] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.774392] usb 2-1: configuration #1 chosen from 1 choice
[    1.855079] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[    1.959617] usb 1-1.1: configuration #1 chosen from 1 choice
[    1.969945] input: D-Link Boxee D-Link Boxee Receiver d.15 as /class/input/input0
[    1.977660] generic-usb 0003:1915:20D9.0001: input: USB HID v1.11 Keyboard [D-Link Boxee D-Link Boxee Receiver d.15] on usb-0000:01:0d.0-1.1/input0
[    1.996401] input: D-Link Boxee D-Link Boxee Receiver d.15 as /class/input/input1
[    2.004248] generic-usb 0003:1915:20D9.0002: input: USB HID v1.11 Mouse [D-Link Boxee D-Link Boxee Receiver d.15] on usb-0000:01:0d.0-1.1/input1
[    2.023165] input: D-Link Boxee D-Link Boxee Receiver d.15 as /class/input/input2
[    2.030867] generic-usb 0003:1915:20D9.0003: input: USB HID v1.11 Keyboard [D-Link Boxee D-Link Boxee Receiver d.15] on usb-0000:01:0d.0-1.1/input2
[    2.048112] generic-usb 0003:1915:20D9.0004: hiddev96: USB HID v1.11 Device [D-Link Boxee D-Link Boxee Receiver d.15] on usb-0000:01:0d.0-1.1/input3
[    2.131780] usb 1-1.3: new high speed USB device using ehci_hcd and address 4
[    2.236559] usb 1-1.3: configuration #1 chosen from 1 choice
[    2.242713] scsi0 : SCSI emulation for USB Mass Storage devices
[    2.250850] usb-storage: device found at 4
[    2.250856] usb-storage: waiting for device to settle before scanning
[    2.320231] usb 1-1.4: new high speed USB device using ehci_hcd and address 5
[    2.418254] usb 1-1.4: configuration #1 chosen from 1 choice
[    2.424271] scsi1 : SCSI emulation for USB Mass Storage devices
[    2.432360] usb-storage: device found at 5
[    2.432366] usb-storage: waiting for device to settle before scanning
[    7.265458] scsi 0:0:0:0: Direct-Access     DaneElec z-PEN            5.00 PQ: 0 ANSI: 0 CCS
[    7.449793] scsi 1:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    7.461036] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    7.466753] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.472562] usb-storage: device scan complete
[    7.491336] sd 0:0:0:0: [sda] 4028416 512-byte hardware sectors: (2.06 GB/1.92 GiB)
[    7.501241] sd 0:0:0:0: [sda] Write Protect is off
[    7.506047] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    7.506053] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    7.513754] sd 0:0:0:0: [sda] 4028416 512-byte hardware sectors: (2.06 GB/1.92 GiB)
[    7.523441] sd 0:0:0:0: [sda] Write Protect is off
[    7.528254] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    7.528261] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    7.534369]  sda: sda1
[    7.538018] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    7.545678] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    7.551505] usb-storage: device scan complete
[   24.888548] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.889567] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   24.890061] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.867150] hfs: unable to parse mount options
[   26.152697]  ESS OSAL release 
[   26.166998] lirc_dev: IR Remote Control driver registered, major 61 
[   26.172886] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
[   26.172897] lirc_mceusb: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>, Dan Conti <dconti@acm.wwu.edu>
[   26.172906] lirc_mceusb: debug mode enabled
[   26.174512] usbcore: registered new interface driver lirc_mceusb
[   26.205010] PAL driver init...
[   26.205081] PIC mode = 1
[   26.205085] Device: CE4100 
[   26.205096] Stepping: B2 
[   26.752719] usbcore: registered new interface driver dhd-bdc-linux
[   26.752740] 
[   26.752742] Dongle Host Driver, version 4.218.116.0
[   28.957027] usb 2-1: USB disconnect, address 2
[   29.207895] usb 2-1: new high speed USB device using ehci_hcd and address 3
[   29.346216] usb 2-1: configuration #1 chosen from 1 choice
[   29.349673] eth1: Broadcom Dongle Host Driver
[   31.021475] platform_config init complete! (build Oct 11 2011)
[   31.070026] ESS SVEN init:Oct 11 2011 10:17:13
[   31.070191] /mnt/more/opt/canmore-13.11/IntelCE-13.232647/project_build_i686/IntelCE/sven-13.11.10484.229643/driver/i686-linux-kernel/sven_linux_driver.c: 222: SVEN Header Initialized e88bc000@2b400000:00001000, circbuf e8a80000@2b300000:00100000 dis:ffffffff
[   31.070265] /mnt/more/opt/canmore-13.11/IntelCE-13.232647/project_build_i686/IntelCE/sven-13.11.10484.229643/driver/i686-linux-kernel/sven_dfx.c: 242: SVEN DFX Enabled @df8f0000:00010000 wpos:0
[   31.106637] SOC CE4100 found
[   31.149732] Clock control: Probing external clock 'IDT_6V49061'...
[   31.154766] Clock control: Probing external clock 'AKM_AK8136'...
[   31.154912] Clock control: Clock 'AKM_AK8136' found, reading configuration...
[   31.229142] CLOCK_SEC_RST reports a 1 so SEC FW/HW are present
[   31.650733] Intel SMD Demux Ver2 Module built on Oct 11 2011 @ 10:22:36
[   31.678315] thermal init complete! (build Oct 11 2011)
[   31.678324] major number =242
[   31.735508] Intel SMD Gen4 Viddec Module built on Oct 11 2011 @ 10:22:01
[   31.738828] Audio DAC driver installed.
[   32.010972] MFD FW version number: 0.8.28
[   32.073814] Intel VPP driver built: Oct 11 2011 10:21:28 
[   32.073823] VPP: Verbosity Level: 1 
[   32.073844] VPP: Intel VPP FW using Gen4 Settings
[   32.136988] Intel SMD Video Renderer Driver built on Oct 11 2011 @ 10:21:12.
[   32.363782] Audio FW for DSP 0 Initialized. Built on Oct 12 2010:09:21:59
[   32.363789] 
[   32.370198] Audio FW for DSP 1 Initialized. Built on Oct 12 2010:09:22:53
[   32.370203] 
[   32.372090] Intel SMD Audio driver initialized. Built on Oct 11 2011 at 10:20:31.
[   32.372099] Available Audio Codecs:
[   32.372182]  -Dolby Digital (AC3): Tensilica DD (AC-3) Decoder Library ver:1.7 API ver:1.15
[   32.372253]  -Dolby Digital Plus (EAC3): Tensilica DD+ 7.1 Decoder Library ver:1.4 API ver:1.15
[   32.372324]  -Advanced Audio Codec (AAC): aacPlus v2 (8-ch) Decoder Library ver:2.9-1 API ver:1.15
[   32.372394]  -MPEG: HiFi2 MP3 5.1-Channel Decoder Library ver:3.1 API ver:1.15
[   32.372464]  -Dolby TRUEHD: HiFi2 Dolby TrueHD Decoder Library ver:1.2 API ver:1.15
[   32.372544]  -Digital Theater Systems (DTS): DTS5.1 Decoder 3.25.40 Library ver:DTS5.1 3.25.40/Xtensa DV1.52 API ver:DTS5.1 API DV1.52
[   32.372617]  -Windows Media Audio (WMA9): Tensilica HiFi2 wma decoder Library ver:1.8 API ver:1.15
[   32.372689]  -Dolby Digital Compatible Output (DDCO): HiFi2 DD Compatible Output Library ver:1.1 API ver:1.12
[   32.372753]  -TrueHD MAT: TrueHD MAT Encoder: Lib ver. 2.1, API ver. 1.4
[   32.372758] 
[   32.498939] alsa_shim: module license 'unspecified' taints kernel.
[   33.177147] Linux video capture interface: v2.00
[   33.258806] au0828 driver loaded
[   33.260062] usbcore: registered new interface driver au0828
[   33.308147] dib0700: loaded with support for 8 different device-types
[   33.309868] usbcore: registered new interface driver dvb_usb_dib0700
[   35.624089] eth0: no IPv6 routers present
[   41.057806] eth1: no IPv6 routers present
[   47.502066] 
[   47.502070] AUDIO RENDER: event wait timed out waiting on ABD callback for async stop!result: 13
[   47.736965] kjournald starting.  Commit interval 5 seconds
[   47.737020] EXT3 FS on Glob_Spectraa3, internal journal
[   47.737031] EXT3-fs: mounted filesystem with ordered data mode.
[   48.729114] kjournald starting.  Commit interval 5 seconds
[   48.729166] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   48.789385] EXT3 FS on Glob_Spectraa4, internal journal
[   48.789393] EXT3-fs: recovery complete.
[   48.848865] EXT3-fs: mounted filesystem with ordered data mode.
[   48.972540] Boxee Boxe SD card detector
[   49.487916] ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
[   49.487923] Using default: (25% of RAM).
[   49.488387] ramzswap: /dev/ramzswap0 initialized: disksize_kb=160876<6>Adding 160868k swap on /dev/ramzswap0.  Priority:-1 extents:1 across:160868k
[   49.585560] PPP generic driver version 2.4.2
[   49.608927] PPP Deflate Compression module registered
[   49.653353] PPP MPPE Compression module registered
[   49.677834] PPP BSD Compression module registered
